We are going to demonstrate how to wall mount your television in this article for your convenience. Because mounting a television often requires heavy lifting, it’s a good idea to enlist the assistance of a friend or family member who lives in the same house as you.
Mounting your television on the wall gives your room an uncluttered, minimalist appearance; consider this option if you like the aesthetic.
If you live in a house that is on the smaller side, this provides your home with a more streamlined appearance while also saving you vital floor space.
Wall mounts that extend, tilt, and swivel allow you to find the optimal viewing angle while also mitigating glare from lights or windows.
In addition, if you have young children or animals, this will protect both them and your television from potential danger.
So, let’s get this party started with a speedy wall survey, shall we?
Check Your Walls
Brick and stud walls are the two most common kinds of residential walls, and the likelihood is high that you have both in your home unless it is a very historic structure. The vast majority of walls are capable of supporting a television, however, you need to exercise extra caution when working with stud walls.
Brick Walls
These walls are suitable for putting a television of any size; however, you should make sure that the mounts go into the brick rather than the mortar. This will provide a far more stable installation. When installing a large television on the wall, it is recommended that you make use of heavy-duty wall anchors. These anchors are made to penetrate masonry and are capable of supporting a variety of loads.
Stud Walls
Plasterboard is often fastened to a hardwood “stud” frame, which is the typical material used to construct interior walls. If you want to mount your TV directly onto the plasterboard, you’ll need to use special plasterboard fixings and make sure that the weight of the TV doesn’t exceed the maximum weight that the fixing kit can support. The wooden “studs” are strong enough to hold a TV, but if you want to mount your TV directly onto the plasterboard, you’ll need to use special plasterboard fixings.
If you have a type of stud wall that has a metal frame, then your television will need to be attached to the plasterboard. Because of this, you will need to ensure that your television is not too heavy for the fixings in the plasterboard.
Check Your Walls Use VESA Standards To Find The Right Mounting Bracket
There are several alternatives for mounting TV bracket available for most televisions; thus, you will need to select the one that is suitable for the weight of your television and the material of your wall.
The majority of televisions adhere to the guidelines established by the VESA, which stands for the Video Electronics Standards Association. By following these rules and taking measurements of the patterns of holes on the back of your TV, you will be able to properly mount your flat-screen TV on the wall.
To determine the VESA dimension, one must:
Determine the distance in millimeters (mm) between the holes that are horizontal and the holes that are vertical by using a tape measure (numbers can also be found in your TV manual). These two values make up your VESA dimension, which you can also find in most cases in the manual that came with your TV or in the list of specs that come with your TV when you buy it.
Non-VESA TV Brackets
There are certain television manufacturers that do not adhere to VESA requirements. If your television is one of these, you will need a universal mounting bracket, which is one that can be adjusted so that the holes are correctly aligned.
Keep in mind that the larger the screen of your television, the heavier it will be, and the more support it will require. Always check the weight rating of your TV mount to ensure that it can support the weight of your television. Televisions that are not placed properly can be hazardous in addition to expensive to repair.
Now Get the Following Equipment
- Mounting bracket
- Tape measure
- Screwdriver
- Pencil
- Spirit level
- Rawl plugs
- Stud detector
- Drill
So, now you’ve got everything you need and you know where your TV’s going, let’s get to mounting it…
1. Get Your TV in the Right Position
Make sure that you have a clear idea of where you want the television to be installed before you begin drilling holes in the wall. It is a good idea to make out a template of your TV so that you can place it on the wall and sit in the seat that you would typically use to watch TV. This will give you a better view of what’s on the screen. On this basis, you will be able to determine whether the television is positioned too high or too low, and you will also be able to mark on the wall the precise spot where you want the center of the television to be.
If you have young children or dogs, you may also want to ensure that it is placed high enough that they are unable to get it.
If you are unsure exactly where your television should be placed, the answer is out. Where should I set up my brand new television set? The article ought to be of assistance.
2. Fix The Mount To the Wall
When you open up your television bracket, you will probably find that it comes in a number of different pieces. The two most important components, though, are a) the piece that snaps onto your television and b) the wall mount that screws straight into your wall studs.
Install the wall mount bracket on the wall once you have chosen a location for your television and after you have made your decision. First, ensure that everything is level by using your spirit level, and then use a pencil to mark the area where you will be drilling.
Check to see that you won’t be putting your bit too close to any electrical cables or pipelines before you start drilling. Using a stud detector, you may determine whether or not there is anything metallic hiding beneath the wall.
After that, drill your holes in the wall and then insert the rawl plugs into the holes you just made.
Place the bracket so that it covers the holes, and then secure it with the screws. But hold off on turning the screws all the way in just yet! Get out your spirit level and make sure your brackets are positioned correctly. If there are any changes that need to be made, feel free to do so. After that, you may adjust the tightness of your screws.
3. Attach the Bracket to Your TV
This phase ought to be smooth and straightforward. Place the screen of your television on a table or other surface that is larger than the screen itself. It is a good idea to protect the screen with towels. Next, locate the mounting holes on the back of the television, and then attach the mount securely.
A helpful hint is to check that the screw holes are aligned correctly and that the screws do not restrict the mount from swiveling or tilting in any direction.
4. Connect the Cables And lift Your TV into Place
Connect anything you wish to attach to your TVs, such as the power lead, the HDMI cable, and the antenna cable. before you put it into mount.
After that, have another person assist you in lifting the television into position while you secure the two halves of the bracket using a screwdriver or an Allen key (this depends on the type of bracket).
Job done! Take pleasure in viewing TV from such an ideal vantage point!
Follow Home Inside for more!